This site is not supported by your current browser.
Please use one of these browsers.
SWG 100 BIO EX Stationary Biogas Analyzer
The SWG 100 BIO EX Stationary Biogas Analyzer is the rugged, ready to use industrial gas analyser for biogas and biomethane plants, ethanol plants, pulp & paper plants, cogeneration heat and power engines (CHP), landfill gas monitoring and CHP, municipal or industrial waste water treatment plants and coal seam gas sites.
Product Description
STATIONARY BIOGAS ANALYZER
The SWG100 Bio EX Stationary Biogas Analyzer can be used in hazardous area zone 2, with compliance to EN 60079-0, EN 60079-15 and cabinet and marking II 3G Ex nA nC IIC T3 Gc.
Advantages
The biogas analysis system SWG100 Biogas-Ex is the rugged, ready to use industrial gas analyser for:
- Biogas (anaerobic digestion) plants. Ethanol plants, pulp & paper plants
- Cogeneration heat and power engines (CHP)
- Biomethane plants
- Landfill gas monitoring and CHP
- Municipal or industrial waste water treatment plants
- Coal seam gas sites
- IP 65 stainless steel cabinet, special construction for use in hazardous area zone 2
- Electric sample gas cooler and condensate draining pump
- Regulated sample gas pump with sample gas flow monitoring and adjustment
- Internal sample flow sensor with filtration od acid sample gas in front of sensor
- Solenoid valve for auto-zero (with clean ambient air) and for automatic calibration
- Sample gas supply cut-off in case of system alarm
- All stainless steel gas connectors 1/8″ID threads
- Flow restrictor orifice gas inlet for high pressure site
- Multiple sampling point monitoring (up to 4 sites Monitoring) with one analyzer
- All password protected, intuitive software guided menu with diagnosis software and logbook
Technical specifications
| Measuring ranges | |||
| O2 | 0 … 25 % (long life) electrochemical | ||
| CH4 | 0 … 100% NDIR | ||
| CO2 | 0 … 100% NDIR | ||
| H2S low | 0 … 50 ppm / overload up to 250 ppm / electrochemical | ||
| H2S |
|
||
| H2S high | 0 … 10,000 ppm / overload up to 50,000 ppm / electrochemical | ||
| H2 | 0 … 1,000 ppm / overload up to 2,000 ppm / electrochemical | ||
| CO | 0 … 10,000 ppm / overload up to 20,000 ppm / electrochemical | ||
| Dimensions and other data | |
| Operating temperature | 41°F to 113°F (+5 … 45°C) or -4°F to 113°F (-20°C … +45°C) with cabinet heater |
| Display | 3,5″ TFT color display |
| Interfaces | RS485 interface (modbus RTU); 4x analog output 4-20 mA, floating, max. load 500R; 2 alarm relays, potential free contacts 24 Vdc/5 A; DIN-rail RS485 / ProfiBus converter |
| Ex classification | cabinet marking II 3G Ex nA nC IIC T3 Gc, compliance to EN 60079-0 and EN 60079-15 |
| Power supply | 230 Vac / 47 … 63 Hz / 90 W (115 Vac power supply on request) |
| Protection | IP 65 |
| Dimensions | 27.55” x 23.61” x 8.26” (700x600x210 mm) (HxWxD) = interior steel enclosure |
| Weight | approx. 88lbs (40 kg) |
Check out our other products for more information HERE.
Read the brochure of the SWG 100 BIO EX Stationary Biogas Analyzer HERE.
Learn more about the specifications for each gas analyzer in our inventory at MRU-Instruments.com!