Product Description

Centrifugal Fans / Blowers: Low noise level & Easy installation

Operating principle

The MAPRO® centrifugal fans, MCF Series, are made of:

  • an intake duct conveying the aspirated gas to the impeller inlet, which is coaxial to the shaft;
  • a closed impeller with axial flow inlet and radial flow exit;
  • a toroidal discharge volute with tangential exit.

The compression of the gas occurs through the increment of kinetic energy given to the gas by the vanes of the impeller and the subsequent conversion of the kinetic energy into static pressure in the discharge volute.

 

Construction features in conformity with the 2014/34/EU Directive (ATEX)

The MAPRO® centrifugal fans, MCF Series, to be used for extraction or compression of combustible gases, such as biological or natural gas, have been designed in order to fall within the Equipment-Group II as defined by the 2014/34/EU Directive, Category 2 both for the surrounding area conditions and for the internals of the machine. Their main construction features are the following:

  • aluminium casted casing, impeller made of spark proof aluminium alloy with caulked vanes, bearings housing made in cast iron and with aluminium casted caps, shaft in carbon steel;
  • casing impregnated with Loctite;
  • casing halves sealed;
  • shaft sealing by a pair of special double-lip seals whose lubrication is provided by an automatic lubricator.

The centrifugal fans are generally coupled to the electric motor via belt drive and the safety drive guard is made of spark-free material. We can also offer machines coupled to the electric motor via flexible shaft coupling and centrifugal fans manufactured in the so-called “CLOSE COUPLED” version (MCF…CC type) – i.e. a flange mounted electric motor is bolted to the fan casing and the impeller, which is dynamically balanced, is fitted directly onto the motor shaft extension.

MAPRO® centrifugal fans, MCF series, can also be supplied for intake or compression of ambient air. In this case, their construction is simplified. For the air-handling version too, it’s available the execution for Zones 1 and 2, 21 and 22 of the 2014/34/EU ATEX European Directive.

 

Advantages

The rotating parts are not in contact with the casing during rotation. There is therefore no friction during operation and thus no internal lubrication is necessary. The gas moving through the machine remains uncontaminated and completely oil-free.

The other main advantages of using the MAPRO® MCF centrifugal fans are:

  • easy installation;
  • low noise level;
  • no vibration;
  • pulsation free gas flow;
  • minimal maintenance.

For more information on Centrifugal Fans / Blowers, please visit: Mapro International’s website.

Contact Mapro International

Contact me
reCAPTCHA
Sending