This site is not supported by your current browser.
Please use one of these browsers.
Multitec BioControl 2 for stationary and mobile gas measuring
Cameron Instruments Inc. is the exclusive Canadian supplier and service partner for Sewerin. Sewerin is a leading manufacturer of measurement instrumentation systems for the continuous automatic measurement and monitoring of the composition of gas: simple safe and efficient. Be it in a biogas plant, landfill, wastewater treatment plant or even a composting plant.
Product Description
Combined Stationary and Mobile Gas Measuring Device
The Multitec BioControl is a combined stationary and mobile gas measuring device consisting of the Multitec BioControl fixed installation and a mobile gas measuring device, namely the Multitec 540/545. Depending on the version of Multitec BioControl, the gas composition and volume can be automatically measured and monitored at up to eight measurement locations.
The Multitec 540 measures the values at the individual measurement locations sequentially. The values are transferred to the Multitec Biocontrol via an interface. The mobile gas measuring device must be regularly maintained to guarantee accurate measuring results.
The Multitec Biocontrol allows easy maintenance for the versions with four and eight measurement locations as standard, with automatic calibration and adjustment with test gas. The Multitec BioControl fixed installation is non-wearing and low maintenance.
All that is required is a regular check for dirt on the flow rate and temperature sensor and cleaning if necessary. This can be done in a few minutes whilst measuring. The mobile Multitec 540 gas measuring device can be easily sent in for servicing. A spare device prevents disruption to operation.
Operating principle
The BioControl 2, with its two fixed measuring inputs, offers all you need to automatically and thus effortlessly measure the exact gas composition in a plant from a stationary position. The system allows reliable data storage and continuous monitoring.
For example, the first stationary measurement location can continuously check the gas composition at the motor while the second stationary measurement location checks the raw gas composition. The mobile measuring device, on the other hand, can be easily used for infinite manual measurements at remote parts of the plant at irregular intervals. Data can be transferred via LAN, or optionally by Profibus module. The alarm relay can be freely configured via the touchscreen.
Advantages of the Multitec BioControl system
- Large, state-of-the-art 4.3” colour touchscreen: easy user-defined settings, language selection
- Flexible configuration to individual requirements: measurement locations/cylces, save intervals, limits, alarm thresholds
- User settings can be restored from first day of use (saved on USB stick)
- Safe, reliable measuring results thanks to self-tests during operation
- Sturdy and durable: all relevant components resistant to aggressive gases
- Autonomous and regular saving of all measurement values and settings on USB stick; no data loss, no manual protocols, seamless documentation
- Comprehensive service: stationary unit largely maintenance-free; fast, first-class support thanks to customer-friendly remote maintenance and diagnostics – anywhere in the world by internet; simple automatic calibration and adjustment using test gas (optional).
Visit the Website of Cameron to learn more about the Multitec Biocontrol 2!
